Clean boot motorola mc9090 manual
Hide Hide permanently. Table of Contents. Motorola symbol ds digital imager scanner pages. Page 4: Patents Motorola.
No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola.
Page Service Information For service information, warranty information or technical assistance contact or call the Support Center.
Motorola MC9090-G Manual
Page Chapter 1 Getting Started Chapter 1 Getting Started Introduction This chapter lists the accessories for the MCG RFID mobile computer and explains how to install and charge the batteries, replace the strap and start the mobile computer for the first time.
Page Charging The Battery Getting Started 1 - 5 Charging the Battery Charging the Main Battery and Memory Backup Battery Before using the mobile computer for the first time, charge the main battery until the amber charge indicator light remains lit see Table on page for charge status indications.
Ensure the accessory used to charge the main battery is connected to the appropriate power source see Chapter 2, Accessories for setup information.
To charge a spare battery: Ensure the accessory used to charge the spare battery is connected to the appropriate power source see Chapter 2, Accessories for setup information. If the mobile computer does not power on, perform a cold boot. See Performing a Cold Boot on page Page Performing A Clean Boot Press the primary battery release on the mobile computer to partially eject the battery from the mobile computer.
On an MCG, while the battery is partially released, simultaneously press and release the trigger and the Power button.
Push the battery to fully re-insert it in the mobile computer. One audible click can be heard as the battery is fully inserted.
Motorola MC9090-G User Manual
Use ActiveSync to synchronize information on the mobile computer with information on the host computer. Page Chapter 2 Accessories The mobile computer has interchangeable modular keypads. The modular keypad can be changed in the field as necessary.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. Keypad Removal Press the Power button to suspend the mobile computer.
The MMC is located under the keypad see Figure on page Replace the keypad and re-attach using the two screws see Figure on page Page Storage FTP server to the mobile computer. Multiple mobile computers can scan a single RD bar code.
Page Airbeam Smart The ability to transfer software over a radio network can greatly reduce the logistical efforts of client software management.
NOTE The screens and windows are provided for illustration purposes only and may differ from actual screens. The applications described may not be available on or applicable to all devices. It also displays battery status and the air protocols supported by the device.
These settings are persistent and will be restored on a device cold boot see Performing a Cold Boot on page Page Tag Logging If this file is edited, the settings will not be implemented until a cold boot occurs.
Alternatively, on some Motorola devices, the registry file can be launched.
Clean boot and blank files.
When this is done, a prompt appears asking the user to choose whether to merge these settings into the registry. This file will restore the demo settings after a cold boot. Alternatively, ; Settings Window When the read tag in the list box is selected, it automatically appears in the Mask field. In the reserved memory bank, access password and kill password can be locked or unlocked separately.
Click on the tag, it appears in EPC Mask field. The tag is now selected for operations. This command is not accepted when read is going on. A reader operating within the specification parameters may operate on any or all of the four available channels. By default all 4 channels will be selected. List of unique tags tags read Menu selections For each new tag found, the mobile computer beeps once and displays a tag icon in the main RFID Tag window.
If more than 20 tags are found, the application allows the user to page forward and backward through the list of icons representing the tags found. To select a tag to view the tag data: 1.
The file is a. This file format can be read by MS Excel, or other applications that support. To set the class type s to read Gen2 is on by default. Tap File - Settings to display the Settings window. Mode menu options offer all of the operations available by tapping an icon on the main Tags window menu bar.
Gen2 tags can be programmed, erased, locked and killed. Locking, and killing tags requires a Kill Code which is 1 byte 8 bits long. The EU configuration is pre-set to comply with the EU regulatory specifications.
The currently installed SymbolRoam version information is displayed. NET 2.
If the surface of the RFID reader becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution. The accessory Page Accessories Do not place battery into a microwave oven or dryer. See Service Information on page i-xii for contact information. Lithium-ion battery Ensure battery is installed properly. If the RFID off. See the not accept scan input.
System Administrator. Page Appendix A: Technical Specifications The following table summarizes the reader technical specifications. Gen2 tags Laser Decode Capability Antenna Integrated, circularly polarized, 1. Page Index Index application security Page 93 Index - 3 remote API Patent and Trademark Office. All other product or service names are the property of their registered owners.
Comments to this Manuals Your Name:.
MC9090 Warm/Cold Boot Procedure
Enter text from picture:. Latest comments: como posso dar page dawn? Print page 1 Print document 96 pages.
Cancel Delete. Sign in OR. Don't have an account?
Motorola MC9090 Cold Boot
Sign up! Restore password.