Page 3 Frequently Asked Questions Page 4: Overviews Controlling the IPCAM and managing images are simplified by using the provided web interface across the network utilizing wireless connectivity. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Installation Guide to avoid damage due to faulty assembly and installation. Page 6: Surveillance Software Gui There are some labels located on the body of the camera; this is an important feature of original Foscam cameras.
If your camera does not have labels, it may be a clone one. Cloned Foscam cameras can not use original firmware and are not eligible for warranty or technical services. Page 7: Login Window Figure 2. You can select the language you need via pull down the dropdown toolbar and click on the language to switch.
Page 8 Figure 2. Figure 2. You can define a name for your camera as you like Please go to chapter 3. There are five text colors to choose from: Black, red, yellow, white, blue.
The bigger the resolution, the better of the image quality is, but the lower the frame rate is. Page 12 You can flip the image by enabling Flip button, or mirror the image by enabling Mirror button.
The Gadget Professor Foscam FI8905W Outdoor Wireless/Wired IP Camera 12 mm Lens
Page 13 Record and multi-device function are controlled by ActiveX controller, therefore Firefox or Google Chrome, Safari browsers will not allow these functions.
Device Status Device Status Figure 3. Page Alias Settings Figure 3.
Foscam FI8905W User Manual
You can define a name for your camera here such as apple. Click Submit to save your changes. The alias name supports special characters. Click the option here to If your country implements the Daylight Saving Time, that option can also be selected.
Page Multi-device Settings Here you can also set one important file locations for the camera, the Alarm Record Path. Simply click Browse and choose the path to the required folder.
Shop with confidence
The Alarm Record Path location is used to store automatically recorded files when the camera is activated by motion. Page 20 Figure 3. Page 21 3. Firstly, make sure all of the cameras you added can be accessed through the internet.
Page 22 Figure 3. Click Submit to save.
Page 23 Click submit after finishing all settings Figure 3. You will see all of the cameras accessible through the internet. Keep the camera in the same subnet of your router or computer.
Figure 3. Page 25 Figure 3. Shenzhen Foscam Intelligent Technology Co.
You can set another port number, such as port , You will only need to fill in the share key. You have done wireless connection of the camera successfully. If the camera has a dynamic IP, after the wireless settings, the IP will be changed. Page 30 3. Make sure the PC has plugged in the wireless network card. Step 01 Enable wireless and choose Adhoc mode. Page 37 Figure 3.
Foscam fi8905w outdoor wireless ip camera user manual
Take hostname ycxgwp. Page Mail Service Settings 3. Page 39 Figure 3. Please try later Page Msn Setting 3. Page Ftp Service Settings 3. Page Alarm Service Settings 3.
Write Your Own Review
Page 45 There are four alarm indicators: 1 Camera will send emails when motion is activated. If you want to receive images when motion is detected, you must set Mail Service Settings first.
Page 46 You can hear the beep sound when the alarm has been detected. Select this option Figure 3. You can find the recording file in the folder which you set previously. Click Submit and the camera will alarm at any time when motion is detected. Page 48 2 Specify an alarm schedule. If you want the camera to alarm during set times select Scheduler and set time range.
If you want to select one serial area, you can click any number between 00 and 23 on the first row, the corresponding column will be selected and it will turn blue. Page 49 If you want to select discrete area, you click the left button on the box of time range.
It will turn blue. If you want to delete it, just click the left button and it will turn grey. Page Upgrade Device Firmware 3. Page 51 Figure 3. Your camera may be damaged if misconfigured during an upgrade.
Foscam FI8904W User Manual
These parameters will be stored in a bin file for future use. Page Reboot Device 3. This is similar to unplugging the power to the camera. Page 55 4. Page 56 Change another port number Figure 5. If you cannot see live video, try shutting down the firewall or anti-virus software and try again. Page 57 4.
If our reseller cannot provide service, pls contact our service department: tech foscam. This manual is also suitable for: Fiw. Comments to this Manuals Your Name:.
Enter text from picture:. Latest comments:. Print page 1 Print document 59 pages.
Cancel Delete. Sign in OR. Don't have an account? Sign up! Restore password.