Humax Ir-ace Ii Manual Pdf

Humax ir-ace ii manual pdf

This STB has been manufactured to satisfy international safety standards. Please read the following safety precautions carefully.

Freeview HD TV Recorder

A device that collects and radiates electromagnetic waves. This includes a satellite dish and a broadband antenna. A frequency to which a carrier frequency is shifted as an intermediate step in transmission or reception.

A low noise microwave amplifier and converter which downconverts a range of frequencies to the IF range. A set of numbers that identifies transport stream packets containing data from a single data stream. Characteristic of an electromagnetic wave determined by the orientation of the electric field vector. An automatic device that receives, amplifies and retransmits a signal on a different frequency.

DiSEqC 1. All our receivers are designed to be DiSEqC 1. This allows multiple antennae to be connected to the STB simultaneously. Do the same for the other LNBs. Connecting a Satellite antenna.

You can connect either a single satellite antenna directly to the digital receiver or several antennae via the converter box or multi-feed equipment LNB.

Ff4 please equip manually expressing

You can connect a further Sat-receiver for example analogue to the common antenna equipment receiver that has satellite signals. Loop Via. If you have another analogue or digital STB and you wish to use the same LNB, then you can connect it via the loop via. Software Upgradeing. The HUMAX digital set-top box is a highly sophisticated product-incorporating one of the best software applications. Whenever a problem is found with this software or extra functions or enhanced applications are added, the software in the equipment must be upgraded.

In order to maintain correct product performance, it is essential to have the most Up-to-date software. However, the manufacturer reserves the right to decide when and where this software upgrade takes place by "beaming" the latest software versions over the air via satellite systems.

Humax IR-ACE, IR-ACE M User Manual

Note that OTA is limited to certain geographical regions only, mainly due to different satellites having different footprints areas where the signal can be received. The software upgrade via the satellite system can only occur under the following circumstances:. Front Panel. Rear Panel. For best results, we recommend using one of the following set-ups:.

Humax ir-ace ii manual pdf

TV with Terrestrial antenna. With a Hi-fi System. Press to select a Service Favourite in the Service List. Press to select a Service All in the Service List.

This button functions in the same way as the RED button icon on a menu. Press to display the service list.

Humax Satellite TV System FOXSAT-HD manual

This button can be used to select the item on the menus. Press to move to the next or previous service. Press to move up or down pages on a menu. Press to display the Main Menu on the screen or return to the screen from a sub menu screen. Press to select a Service Network in the Service List.

TECH SPECS

Press to select a Service Alphabet in the Service List. This button functions in the same way as the BLUE button icon on a menu.

Feuille d heure pdf editor

Information Box I-Plate. The detailed information on a service and its event is automatically displayed at the bottom of the screen I-Plate whenever a service changes. To obtain this information when watching a service, press the i button. If you press the i button again while the I-Plate is displayed, the I-Plate disappears. The service information is situated on the left side of the I-Plate and consists of the following items:.

Humax DVR OC-5000HD manual

The event information is situated on the right side of the I-Plate and consists of the following items:. There are two types of event information, present event information and following event information. If the following one is available, the icon is displayed.

Humax ir-ace ii manual pdf

Activate the I-Plate using the i button. If the present event information is available, it is displayed on the I-Plate. If the following event information is available, the icon is displayed.

Humax ir-ace ii manual pdf

Press the button to switch to the following event information. Press the button to return to the present event information. If the present one is not available, the icon is not displayed and cannot return to from the following one.

If you press the HELP button while the I-Plate is displayed, the detailed description of the event will be displayed on the help window instead of help messages.

Humax ir ace ii

If there is no available data for the detailed description on the air, the help message is displayed on the help window instead. Changing Services. If the OK button is not pressed, the service is automatically changed to the service number keyed in after about 5 seconds.

Select the desired service using the button. Press the OK button, and the service is changed to the desired one. Teletext Service. Volume Control.

how to program old humax receiver

To adjust the volume level, use the button or the button. To mute the audio, press the MUTE button. To recover the audio level, press the MUTE button again, or the , button. Press the button to activate the list of supported audio languages.

Humax IR-ACE II Satellite TV System User Manual

Select the desired audio language in the list using the keys. Select the audio mode mono, stereo, Dolby in the desired audio language using the buttons. If the selected audio language is invalid from some reason, the default audio language will be selected. The default audio language can be set on the Language Setting in the Main menu.

If an audio language is encoded by Dolby Digital, the Dolby Digital Symbol will appear in the list of audio languages.

Humax ir-ace ii manual pdf

If there is a subtitle service available on the air, the subtitle icon will appear in the I-Plate. Press the button to activate the list of supported subtitle languages. Select the desired subtitle language in the list using the keys. Service List. There is also a Configuration Service menu to change the attributes of each service in the list.

In the service list, some buttons are used to switch the service list type or select the service. Change to the service whose attributes are to be changed using the , or other method.

Press the FAV button. When done, press the OK button. To cancel, press the EXIT button. The All Service list is a normal one, where the service list is organised according to the order in which services are searched.

Humax ir-ace ii manual pdf

The latest service will be added at the end of the service list. Services can be grouped in the favourite list. To add a service to a group in the favourite list, the Configuration Service box or the Service Organising menu in the main menu can be used. In the Network Service mode, the service list is organised according to the network to which a service belongs. When the cursor is in the network name list, the desired network can be selected using the button.

All services belonging to the selected network will be listed in the service name column. In the Alphabetical Service mode, the list of services is given alphabetically according to the service name.

Whenever the BLUE button is pressed in the Alphabetical Service list, the cursor will be toggled between the alphabet character column and the service name column. When the cursor is in the alphabet character list, the desired alphabet character can be selected using the button. All services with the selected alphabet character as a first character in the service name will be listed in the service name column. TV Guide. The TV Guide is useful when all the services are being navigated, since it offers all possible viewing options.

Parental Control. The PIN code is an important password when reconfiguring the STB, locking some services and giving access to the locked services. The service can be reserved in the TV Guide.

The NOW mode displays information on the present services and following services.