Also See for Technical manual - 21 pages. Page of 19 Go. The Service Information provides the following information:. Table of Contents.
Page 3: Introduction The information provided in this document is for the use of qualified personnel only. Caution The , , and contain parts that can be damaged by static discharge.
Follow the standard practices for handling static sensitive devices. To avoid potential hazards, use the product only as specified.
How a 3 speed manual transmission works.... Kinda
These statements identify conditions or practices that could result in damage to the equipment or other property. General specifications Characteristics Capacitance Overload Range Accuracy protection 6.
If the recommended models are not available, equipment with equivalent specifications may be used. Repairs or servicing should be performed only by qualified personnel.
Table B. Page Basic Maintenance Using a screwdriver, remove the four screws. Replacing the Battery The meter is powered by 1.
To replace the battery, refer to Figure 1A. Figure 1A The display should indicate between 0.
Page Testing The Capacitance Function Page 13 Testing the Capacitance Function The meter measures capacitance by charging the capacitor with a known direct current, measuring the resultant voltage, and calculating the capacitance.
If the same capacitance is measured on an impedance bridge, a different reading may result. This variance is likely to be greater at higher frequencies. To verify the accuracy of the capacitance measuring function, do the following: 1.
Turn the rotary switch to mA. Apply the inputs for steps in Table 6. Disconnect the test leads and turn the meter off. Remove the test leads from the front terminals. This manual is also suitable for: Comments to this Manuals Your Name:.
IDEAL INDUSTRIES 61-312 Technical Manual
Enter text from picture:. Latest comments:. Print page 1 Print document 19 pages.
Cancel Delete. Sign in OR.
Don't have an account? Sign up! Restore password.