The Rocklinizer comes in five different models to meet your specific needs.
To place an order, simply fill out our online form or contact Rocklin Manufacturing Co. Note: "E" models are volts.
Approximately 30 lbs. Model Rotary Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
Approximately 49 lbs. Model Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
EDM Tech Center Product Catalog
Approximately 33 lbs. Approximately 26 lbs.
MoldMender Main Video
Model has variable discharge positions. Approximately 28 lbs.
Self-Sharpens With Continued Use. Patent Pending By George Lambert. No previous molding experience is required to operate the Rocklin MoldMender Microwelder.
Rocklin MoldMender Microwelders have six low power selections and eight high power selections, which adjust the microweld pulse length to accommodate different microwelding situations. Also, the microweld speed number of microwelds per second has six selections.
Rocklin MoldMender Microwelders come complete with power cord, foot switch and cable, metal scissors, electrode holder and cable, ground plate and cable, small electrode, large electrode, repair materials choice of 4 metallic ribbons, 2 metallic wires and 1 metallic paste , and instruction manual.
The ribbon material or wire usually is in the annealed state before microwelding, but will be in the hardened state after being bonded in place.
The hardness of the microweld will vary of course, according to what material is used in the repair, which should have the same or similar properties as the workpiece. Stainless steel, nickel alloys, and mold steels, such as P, S-7, A-2, and stainless are some of the more commonly repaired materials.
Rocklin Manufacturing Co. To place an order, fill out our online form or contact Rocklin Manufacturing Co.