Loading a Media Roll on the HP DesignJet T930, T1530, and T2530 Printer Series - HP DesignJet - HP
We service Carriage: We check to see the carriage is moving freely across the entire Scan Axis area. We assure that the carriage cover is properly closed.
We remove all print-heads from the carriage to look for pieces of paper under the print heads. Cutter: We make sure that the cutter is all the way to the left of the plotter and it engages and disengages correctly and move freely on the rail for Design-Jet T, T, T, T, Z, Z, Z and Z plotters with the cutter not attached to the carriage.
We make sure that the cutter slides freely when the carriage is manually moved from side to side on Design Jet T, T, T, T, T and Z with cutter attached to the carriage.
The cutter should be deactivated up position pieces of paper should not obstruct its movement. Belt: We always inspect for loose, worn-out, shredded or broken belt.
If the carriage belt is broken the Scan Axis Motor will not be able to grab it and move it. Encoder strip: We inspect the encoder strip for scratch, bent or damaged.
HP DesignJet T2500 Multifunction Printer series
We clean dirty encoder strip using a non-abrasive liquid and a lint-free cloth. Service station: We look for pieces or paper in the service station.
We check for obstruction, if the carriage stops on it when it shows the , or system errors. Star-wheel assembly: We check to see if there is a piece of paper under the star wheel assembly if so it will not be able to move up and down correctly.
If it remains only in the up position, the carriage may touch it when it moves from side to side. When the lever on the left is up, paper should manually pass under the Star-wheel Assembly and through the complete Paper Axis area from the back to the front with no problems. They must also slide freely through the Tube Rail.
The Trailing Cable must freely move and follow the movement of the carriage and tubes. Scan Axis Motor: We check to see the scan axis is able to move the carriage while initializing if so the motor is okay.
If the Scan Axis Motor moves then most likely the motor is not the problem. System Error Code or in some cases or indicates a paper jam or x axis motor error has occured. System error code , , and paper jam error, paper jam service error code and DesignJet paper jam in the path!
Most Common parts that causes , , and System Errors Carriage: We check to see the carriage is moving freely across the entire Scan Axis area. System error code , , service error code repairs in Southern California!
All images and logos used with permission from the respective owners. No part of this site, or its source code, may be reproduced in any way.